Cisco Systems 416 manual 7-21, Example 7-1 ATM PVC Virtual Template

Chapter 7 Provisioning: Configuring QoS for IP Telephony

Advanced IP Telephony Network Configuration

Example 7-1 ATM PVC Virtual Template

interface ATM4/0.60 point-to-point

protocol ppp Virtual-Template60

!

interface Virtual-Template60 bandwidth 256

ip address 10.200.60.1 255.255.255.252 ppp multilink

Example 7-2 Frame Relay DLCI Virtual Template

!

interface Serial6/0 no ip address encapsulation frame-relay

!

interface Serial6/0.60 point-to-point bandwidth 256

frame-relay interface-dlci 60 ppp Virtual-Template60

!

interface Virtual-Template60 bandwidth 256

ip address 10.200.60.2 255.255.255.252 ppp multilink

If you have already added the devices to QPM, rediscover the devices in QPM so that the virtual template interfaces are recognized. See Rediscovering Device Information, page 4-12.

Otherwise, add the devices to QPM (see Adding Devices to the Device Inventory, page 4-3).Step 2 Create policy groups from these QPM templates, and assign them to the described interfaces.

•WanATM2FR-FR-Main—Assign to the main Frame Relay interface.

•WanATM2FRVirtualTemplate—Assign to both the ATM and Frame Relay virtual template interfaces.

•WanATM2FR-FR-DLCI—Assign to the Frame Relay DLCI.

•WanATM2FR-ATM-PVC—Assign to the ATM PVC.

Step 3 Deploy the policies. See Deploying Policies and QoS Configurations, page 9-2.

User Guide for CiscoWorks QoS Policy Manager 4.1.6

OL-23444-01 7-21