Chapter 7 Provisioning: Configuring QoS for IP Telephony
Modifying Voice Policies
The voice policy groups and your
Related Topics
•Using QPM Tables, page
•Using the IP Telephony Wizard, page
•Viewing Policy Information, page
•Troubleshooting the IP Telephony Network, page
End
The final step of the IP Telephony wizard informs you that all the QoS settings have been completed and that the wizard has added and saved the policies in the current deployment group.
From this page, you can select to go to the Deployment wizard to deploy the deployment group directly, or to the Policy Groups page to view a detailed summary of all the voice policy groups that were created by the wizard. From the Policy Groups page, you can modify the properties and policies configured in the voice policy groups, if required.
To finish the wizard:
Step 1 Select the Yes or No radio button, depending on whether or not you want to deploy your QoS policies.
Step 2 Click Finish to close the wizard.
The Policy Groups page or the Deployment wizard appears.
Related Topics
•Modifying Voice Policies, page 7-17
•Modifying a Policy, page
•Chapter 9, “Provisioning: Deploying QoS Policies”
Modifying Voice Policies
After you have completed the IP Telephony wizard, you can modify properties and traffic rules of the voice policies created by the voice wizard, to suit a specific network configuration. You can also add nonvoice rules to the default voice policies.
Note You cannot modify a voice policy that is linked to a policy template. You must disconnect the voice policy from its template, or modify the template.
After you have completed the IP Telephony wizard and you selected not to deploy your QoS policies directly (see End, page
User Guide for CiscoWorks QoS Policy Manager 4.1.6
|
|
| |
|
|