Chapter 7 Provisioning: Configuring QoS for IP Telephony
Configuring QoS Using the IP Telephony Wizard
•Selecting IntraLAN Connections
•Selecting Voice VLAN Connections
•Selecting Switch to WAN Router Connections
•Selecting Router WAN to Switch Connections
•Selecting WAN Point to Point Connections
•Selecting WAN Frame Relay Connections
•End
Before you Begin
To run the wizard, it is assumed that the following preconditions have been met:
•Voice VLANs have been configured on all the relevant ports of the devices to enable the wizard to attach QoS properties to these VLANs.
•All the relevant devices in your network were added or imported to QPM’s device inventory.
Related Topics
•Configuring QoS Using the IP Telephony Wizard, page
•IP Telephony Wizard: Assignment Summary Page, page B-129
•Viewing Policy Information, page 8-14
Introduction
The first page is an introduction to the wizard. It includes an overview of why QoS configuration is necessary for VoIP networks, and how the wizard will guide you to configure QoS for IP telephony.
Before you run the wizard, ensure that all the required devices in your IP telephony network have been added to the device inventory. If not, you must exit the wizard and add or import them. After adding your devices, you can check that your devices support voice QoS, by running the Voice Ready report. The Voice Ready report shows all the devices in the current device group, and whether or not they support voice QoS.
This page also displays the name of the current deployment group that will be used by the wizard for defining the IP telephony policies. You can change the current deployment group, if required.
To open the Introduction page of the wizard:
Step 1 Choose Provisioning > Policy View.
The Policy View page opens.
Step 2 Click Voice Policy.
The IP Telephony Wizard - Introduction page appears.
User Guide for CiscoWorks QoS Policy Manager 4.1.6
|
| ||
|
|
