Corporate Headquarters:
Copyright © 2001–2002. Cisco Systems, Inc. All rights reserved.
Cisco Systems, Inc., 170 West Tasman Drive, San Jose, CA 95134-1706 USA
Catalyst 6000 Family Network Analysis Module Installation and Configuration NoteWS-X6380-NAM
This publication describes how to install the Catalyst6000 family Network Analysis Module (NAM) and
how to configure the NAM using the Catalyst command-line interface (CLI), the NAM Traffic Analyzer
application, or both. See the “Related Documentation” section on page73 for more information about
software configuration for the switch.
Note For translations of the warnings in this publication, see the “Safety Overview” section on page6 and
refer to the Regulatory Compliance and Safety Information for the Catalyst 6000 Family Switches.
Contents
This publication consists of these sections:
•Overview, page2
•Safety Overview, page6
•Software Requirements, page 8
•Hardware Requirements, page 9
•Required Tools, page 9
•Installing and Removing the NAM, page9
•Configuring the NAM, page16
•Administering the NAM, page 38
•Troubleshooting the NAM, page59
•Supported RMON and RMON2 MIB Objects, page 64
•GNU General Public License, page 68
•FCC Class B Compliance, page 72