46
Catalyst6000 Family Network Analysis Module Installation and Configuration Note
78-10406-05
Administering the NAM
02:27:19:SP:The PC in slot 9 is shutting down. Please wait ...
02:27:36:SP:PC shutdown completed for module 9
02:27:36:%C6KPWR-SP-4-DISABLED:power to module in slot 9 set off (admin
request)
02:27:39:SP:Resetting module 9 ...
02:27:39:%C6KPWR-SP-4-ENABLED:power to module in slot 9 set on
02:29:37:%SNMP-5-MODULETRAP:Module 9 [Up] Trap
02:29:37:%DIAG-SP-6-BYPASS:Module 9:Online Diagnostics is Bypassed
02:29:37:%OIR-SP-6-INSCARD:Card inserted in slot 9, interfaces are now
online
Router#
Catalyst OS Software
This section contains the various administrative tasks you can perform on the NAM using the
Catalyst OS software:
•Logging into the NAM, page47
•Changing and Recovering the NAM CLI Passwords, page 48
•Resetting the NAM, page 49
•Upgrading the NAM Software, page 49
You can administer the NAM by using the NAM Traffic Analyzer application. Refer to the User Guide
for the Catalyst 6000 Network Analysis Module NAM Traffic Analyzer.
You can perform these administrative tasks on the NAM:
•Add and remove NAM users and change passwords using either the CLI or the NAM Traffic
Analyzer application.
•Recover passwords as superuser (but not change passwords).
•Change local and remote (TACACS+ server) users and passwords by using the NAM Traffic
Analyzer application. Refer to the NAM Traffic Analyzer application online help topic “User and
System Administration” for information about user and password administration.