58
Catalyst6000 Family Network Analysis Module Installation and Configuration Note
78-10406-05
Administering the NAM
Configuration Commands
The following commands are all performed in either global configuration mode or the interface
configuration mode:
•Global Configuration Mode, page 58
•Interface Configuration Mode, page 58

Global Configuration Mode

The following commands are all performed in global configuration mode:

Interface Configuration Mode

The following commands are configuration commands performed in interface configuration mode:
show interface trunk module slot_number Displays current trunk settings for the interfaces.
clock set time date Sets the current time and date.
clock update-calendar Updates the calendar time to the clock time.
clock read-calendar Updates clock time to the calendar time.
Command Description
Command Description
power enable module slot_number Turns the power on for the NAM if it is not already on.
no power enable module slot_number Shuts down the NAM and removes power.
clock timezone zone offset Sets the timezone for the switch or NAM.
clock summer-time zone recurring Sets the switch to use summertime settings.
clock calendar valid Sets the current calendar time as the switch time on startup.
interface GigabitEthernet slot number/port number Begins configuration for each NAM port.
monitor session session {source {interface interface
interface-number | {vlan vlan-id}} [ , | - | rx| tx | both]
Sets the sources for a SPAN session.
monitor session session {destination {interface interface
interface-number} [ , | -] {vlan vlan-id}}
Sets the destination for a SPAN session.
Command Description
switchport Sets interface as a switchport.
switchport trunk encapsulation dot1q Sets dot1q as the encapsulation type.
switchport trunk native vlan vlan Sets native VLAN for the trunk port.
switchport trunk allowed vlan vlans Sets allowed VLANs for a trunk.
switchport mode trunk Sets the interface as a trunk port.
switchport capture Sets the interface as a capture port.
switchport access vlan vlan Sets the access VLAN for the interface.
switchport mode access Sets the interface as an access port.