43
Catalyst6000 Family Network Analysis Module Installation and Configuration Note
78-10406-05
Administering the NAM
Network Analysis Module (WS-X6380-NAM) Console, 1.2(1a)m
Copyright (c) 1999, 2000, 2001 by cisco Systems, Inc.
root@hostname.cisco.com#
upgrade ftp://root@hostname-ultra10/tftpboot/c6nam.1-2-1.bin.gz
Password for root@hostname-ultra10:
500 'SIZE c6nam.1-2-1.bin.gz':command not understood.
ftp://root@danlee-ultra10/tftpboot/c6nam.1-2-1.bin.gz (unknown size)
- [|] 39103K
40041798 bytes transferred in 34.57 sec (1131.27k/sec)
downloaded image version 2.1(1)
Upgrade file ftp://root@danlee-ultra10/tftpboot/c6nam.1-2-1.bin.gz
is downloaded. Upgrading will wipe out the
contents of the application partition on the hard disk.
Do you want to proceed installing it [y|N]:y
Proceeding with installation. Please do not interrupt.
If installation is interrupted or fails, boot this
partition again and restart upgrade.
00:21:50:%NAM-3-NO_RESP:Module 9 is not responding
Upgrade complete. You can boot the new application partition.
root@hostname.cisco.com# exit
[Connection to 127.0.0.91 closed by foreign host]
Router#
Router#hw-mod module 9 reset
Device BOOT variable for reset =
Warning:Device list is not verified.
Proceed with reload of module? [confirm] y
% reset issued for module 9
Router#
00:24:04:%SNMP-5-MODULETRAP:Module 9 [Down] Trap
00:24:04:SP:The PC in slot 9 is shutting down. Please wait ...
00:24:18:SP:PC shutdown completed for module 9
00:24:18:%C6KPWR-SP-4-DISABLED:power to module in slot 9 set off (admin
request)
00:24:21:SP:Resetting module 9 ...
00:24:21:%C6KPWR-SP-4-ENABLED:power to module in slot 9 set on
00:26:19:%SNMP-5-MODULETRAP:Module 9 [Up] Trap
00:26:19:%DIAG-SP-6-BYPASS:Module 9:Online Diagnostics is Bypassed
00:26:19:%OIR-SP-6-INSCARD:Card inserted in slot 9, interfaces are now
online
Upgrading the NAM Maintenance Software

To upgrade the NAM maintenance software, follow these steps:

Step 1 Copy the NAM maintenance software image to a directory accessible to FTP.

Step 2 Log in to the switch through the console port or through a Telnet session.

Step 3 If the NAM is already running in the application image go to Step 5. If not, enter this command in the

privileged mode:

Router#hw-mod module 9 reset hdd:1
Device BOOT variable for reset = hdd:1
Warning:Device list is not verified.