Cisco Systems 6100 Connecting the DS3 Subtending Card, Installation - Subtended Network, Transmit

8 Installation - Subtended Network 78-5481-02 09/15/98

8.2.2 Connecting the DS3 Subtending Card

The DS3 subtending I/O card has two sets of DS3 75-ohm coaxial BNC connectors. Each set consists of a transmit and a receive connector. The following figure illustrates the 2x DS3 subtend card.

Figure 8-2 DS3 Subtend Card

Transmit

TX 1

Receive

RX 1

Transmit

TX 2

Receive

RX 2

16830

8-4Cisco 6100 Set Up and Installation Manual