Cisco Systems 7935 quick start Getting Started, Introduction, Package Contents

1Getting Started

This guide helps you quickly set up and use the Cisco IP Conference Station 7935. The IP Conference Station requires Cisco CallManager and your system administrator must prepare the network for the IP Conference Station. If a technician is not installing the IP Conference Station, verify with your system administrator that the network is ready for the IP Conference Station. Be sure to read the Release Notes and both the Parts List and the Safety Notices sections in this guide before you begin to set up and use the IP Conference Station.

Note If your IP Conference Station is already set up, skip to Section 3, Features and Web Interface.

Introduction

The Cisco IP Conference Station 7935 is an IP-based, hands-free conference room station that uses Voice over IP (VoIP) technology. The IP Conference Station provides basic business conferencing features and functions, such as Call Hold, Call Transfer, Call Release, Mute, and Conference, over an IP network. It is designed to be used primarily on desktops and in small- to medium-sized conference rooms to facilitate conference calling. It replaces a traditional analog conferencing unit in an

IP telephony network.

Package Contents

Review the following list to be sure that you have received all of the necessary items to install the IP Conference Station.

•1 Cisco IP Conference Station 7935

•1 6 ft. CAT 5 Cable

•1 25 ft. CAT 5 Cable

•1 Power Interface Module (PIM)

•1 Power Supply Unit (a country-specific power cord must be ordered separately)

•1 Documentation Roadmap

•1 Quick Start Guide

•1 Quick Reference Card

•1 Regulatory Compliance and Safety Information Guide

•1 Warranty Card

5