Chapter 2 Installation

Mounting the Router

Figure 2-1 Wall-Mounting Brackets (Bottom of Router)

1

2

3

4

 

 

 

80289

 

 

 

 

1

Front panel of router

3

Distance between two mounting

 

 

 

brackets (7 5/8 in. or 19.35 cm)

 

 

 

 

2

Mounting bracket

4

Bottom of router

 

 

 

 

Caution If you are mounting the router on drywall, use two hollow-wall anchors (1/8-in. with 5/16-in. drill bit, or M3 with 8-mm drill bit) to secure the screws. If the screws are not properly anchored, the strain of the network cable connections could pull the router from the wall.

The following requirements must be met when you mount the router:

•Because the LEDs are used as status and problem indicators, the LEDs on the front panel must face upward and must be easily visible.

•The back panel must face down to reduce strain on the cable connections.

•The power supply must rest on a horizontal surface, such as the floor or a table. If the power supply is not supported, strain on the power supply cable could cause it to disconnect from the connector on the router back panel.

 

Cisco 837 Router and SOHO 97 Router Hardware Installation Guide

2-8

78-14781-02

Page 31 Page 33
Page 32
Image 32
Cisco Systems 837, SOHO 97 manual Wall-Mounting Brackets Bottom of Router
Page 31 Page 33

837, SOHO 97 specifications

Cisco Systems SOHO 97 is a noteworthy offering in the realm of networking hardware, designed to cater specifically to small office and home office (SOHO) environments. Launched in the late 1990s, the SOHO 97 router marked a significant advancement in networking solutions for small businesses, enabling cost-effective connectivity and reliable communication.

One of the primary features of the Cisco SOHO 97 is its ability to support both wired and wireless connectivity, making it versatile for varying user needs. The device supports a standard RJ-45 Ethernet interface, allowing users to connect multiple devices through LAN ports. Furthermore, its built-in support for PPPoE (Point-to-Point Protocol over Ethernet) enables broadband connectivity, which is crucial for internet access in modern setups.

In terms of technology, the Cisco SOHO 97 incorporates NAT (Network Address Translation) capabilities, enabling multiple devices to share a single public IP address. This feature is particularly advantageous in SOHO environments where budget constraints often limit the number of public IP addresses that can be obtained. Security is also a critical concern, and the SOHO 97 addresses this with integrated firewall capabilities to protect the internal network from outside threats.

The device is equipped with a user-friendly web-based management interface, allowing even non-technical users to configure and manage their network settings with ease. This intuitive interface provides easy access to settings such as DHCP (Dynamic Host Configuration Protocol), DMZ (Demilitarized Zone) configurations, and port forwarding options.

Additionally, the device supports various routing protocols, including RIP and Static Routing, providing flexibility in network design and implementation. It is built to handle a wide range of network tasks, from basic internet browsing to more complex operations like VPN (Virtual Private Network) support, which enhances security for remote users accessing the network.

The compact design of the Cisco SOHO 97 allows it to fit discreetly into any office environment, while its reliability makes it a trusted choice for small businesses. Overall, the Cisco SOHO 97 exemplifies the balance of performance, security, and ease of use that is essential for small office and home office networking today.
Top Page Image Contents