5-7
Installation and Upgrade Guide for Cisco Unified MeetingPlace Audio Server 6.x
OL-13417-01
Chapter 5 Testing the Cisco Unified MeetingPlace Audio Server System Installation and Upgrade Testing Network Latency
Testing Network Latency
To Test Network Latency
Step 1 Access the CLI and enter ping -s 1000 IP_address_of_another_machine_on_the_network. The
“-s 1000”argument simulates normal network activity by sending 1,000 bytes of dummy data to the other
IP address.
Step 2 After you receive several reply messages, enter Ctrl-C.
If there is no reply, the Cisco Unified MeetingPlace Audio Server system cannot make a network
connection to the machine that you specified. Verify the IP address and consult the internal networking
contacts.
Step 3 Confirm that there is 0 percent packet loss.
Example 5-1 Testing Network Latency
meetingplace:tech$ ping -s 1000 172.20.19.25
--- Type <CTRL-C> to stop ---
PING 172.20.19.25 (172.20.19.25): 1000 data bytes
1008 bytes from 172.20.19.25: icmp_seq=0 ttl=255 time=2.897 ms
1008 bytes from 172.20.19.25: icmp_seq=1 ttl=255 time=2.584 ms
1008 bytes from 172.20.19.25: icmp_seq=2 ttl=255 time=2.587 ms
1008 bytes from 172.20.19.25: icmp_seq=3 ttl=255 time=2.578 ms
1008 bytes from 172.20.19.25: icmp_seq=4 ttl=255 time=2.615 ms
1008 bytes from 172.20.19.25: icmp_seq=5 ttl=255 time=2.582 ms
1008 bytes from 172.20.19.25: icmp_seq=6 ttl=255 time=2.577 ms
1008 bytes from 172.20.19.25: icmp_seq=7 ttl=255 time=2.586 ms
^C
--- 172.20.19.25 ping statistics ---
8 packets transmitted, 8 packets received, 0% packet loss
round-trip min/avg/max = 2.571/2.603/2.897 ms