1-27
Cisco ASR 9000 Series Aggregation Services Router Overview and Reference Guide
OL-17501-09
Chapter 1 Overview and Physical Description
Route Switch Processor and Route Processor Cards
RP Front Panel and Access PortsSystem alarms reside on the RP. Alarms consist of visual indicators with three levels: Critical (red),
Major (red), and Minor (amber). There is a console interface for remote viewing of alarms and fault
information. The RP front panel has the following information and alarm LEDs and connectors:
• Two BITS RJ-45 Sync timing ports
• Two 10 GE SFP/SFP+ ports
• IEEE1588 RJ-45 Timestamp port
• RS232/422 GPS TOD RJ-45 port for system timing input
• 10 MHz and 1 PPS clock input SMB ports
• Alarm Output DB9 port with three alarm outputs
• External USB2, class-A port
• Two RJ-45 100/1000 Mbit Ethernet Management ports
• RJ-45 Console port
• RJ-45 Auxiliary (AUX) port
• Alarm Cut Off (ACO) and Lamp Test momentary push buttons
• RP Discrete Status LEDs
–
SSD LED
–
FC Fault LED
–
GPS LED
–
Critical Alarm LED (red)
–
Major Alarm LED (red)
–
Minor Alarm LED (amber)
–
Power Fail LED
–
ACO LED (amber)
–
SYNC LED (green and amber)
• One 4-character 5x7 LED dot-matrix display
Figure 1-25 shows the front panel of the RP card.