Cisco Systems 9010 LED Matrix Display

2-12

Cisco ASR 9000 Series Aggregation Services Router Overview and Reference Guide

OL-17501-09

Chapter 2 Functional Description

Route Processor Card

LED Matrix Display

The LED matrix displays one row of four characters. The matrix becomes active when the CPU powers

on and displays the stages of the boot process, as well as displaying runtime information during normal

operation. If there are CAN Bus Controller problems, error messages are displayed.

LED Matrix Boot Stage and Runtime Display

Table 2-3 describes the RSP LED matrix displays of the stages of the boot process and runtime information.

Table 2-4 describes the RSP-440 and RP LED matrix displays of the stages of the boot process and runtime

information.

Not all of these messages are seen during a successful boot up process because the screen is updated too

quickly for the message to be visible. A failure detected during the boot up process results in the message

remaining visible indicating the stage where the boot up process stopped. When possible, the RSP/RP

card logs the failure information and reboots.

Synchronization

(SYNC)

Green System timing is synchronized to an external timing source including 

IEEE 1588.

Amber System timing is free running.

Off 

(Default after reset)

LED never turns off.

Internal Solid

State Hard Disk

Drive (SSD)

Green Internal Solid State Hard Disk Drive (SSD0) is busy/active. The LED is

driven by the SSD controller.

Off 

(Default after reset)

Internal Solid State Hard Disk Drive is not busy/active.

FC Fault Amber A fault has occurred on any or all of the FC cards installed. This LED will

be on during the boot phase of the FC.

Off 

(Default after reset)

FC cards are booted up and ready.

GPS Green GPS interface provisioned and ports are turned on. ToD, 1 PPS, 10 Mhz are

all valid.

Off 

(Default after reset)

Either the interface is not provisioned, or the ports are not turned on. ToD, 

1 PPS, and 10 Mhz are not valid.

Table 2-2 RP Discrete LED Display Definitions (continued)

Indicator (Label) Color Description

Table 2-3 RSP LED Matrix Boot Stage and Runtime Display

LED Matrix Display Description

INIT Card is inserted and microcontroller is initialized.

BOOT Card is powered on and CPU is booting.

IMEM Starting initialization of memory.

IGEN Starting initialization of card.

ICBC Initializing communication with the microcontroller.

Contents

Main Page CONTENTS Page Page Page Preface Audience Related Documentation Changes to This Document Document Conventions Obtaining Additional Information and Support Page Overview and Physical Description Chassis Physical Overview Cisco ASR 9010 Router 1-3 1-4 Cisco ASR 9006 Router Figure 1-4 Cisco ASR 9006 Router Chassis ComponentsVersion 2 Power Tray Figure 1-3 Cisco ASR 9006 Router Chassis ComponentsVersion 1 Power Tray Cisco ASR 9904 Router Cisco ASR 9922 Router Page Cisco ASR 9912 Router Field Replaceable Units Rack-Mounting Considerations 1-10 1-11 1-12 1-13 Chassis Slots Page Fiber and Interface Cable Management Routing of DC Power Tray Source Cables 1-18 Slot Numbering and Marking 1-19 Figure 1-17 Cisco ASR 9010 Router Slot ID NumberingVersion 2 Power Trays 1-20 Page 1-22 1-23 Power Module Hardware and Software Identification Hardware ID Software ID PS0 M0 PM0 PS0 M1 PM1 PS0 M2 PM2 PS0 M3 PM3 PS1 M0 PM4 Route Switch Processor and Route Processor Cards RSP Front Panel and Access Ports Page Page RP Front Panel and Access Ports Page Management Features Alarm Connector Serviceability RSP and RP Card Ejector Levers Fabric Controller Card Page FC Card Ejector Levers Ethernet Line Cards Line Card Front Panel and Access Ports Line Card Serviceability Line Card Ejector Levers Power System Line Card Front Panel and Access Ports Line Card Serviceability Line Card Ejector Levers Power System AC and DC Power Modules Page Cooling System Cooling Path Fan Trays Management and Configuration Page Functional Description Router Operation 2-2 Figure 2-2 shows the platform architecture of the Cisco ASR 9922 Router and Cisco ASR 9912 Router. 2-3 Figure 2-3 Major System Components and Interconnections in the Cisco ASR 9000 Series Routers 2-4 2-5 Figure 2-5 Major System Components and Interconnections in the Cisco ASR 9922 Series Router Route Switch Processor Card Page Page Route Processor Card Front Panel Connectors Management LAN Ports Console Port Auxiliary Port Alarm Out Front Panel Indicators Page LED Matrix Display LED Matrix Boot Stage and Runtime Display Page LED Matrix CAN Bus Controller Error Display Push Buttons Functional Description Switch Fabric Page Unicast Traffic Multicast Traffic Route Processor Functions 2-18 Processor-to-Processor Communication Route Processor/Fabric Interconnect Fabric Controller Card Page FC Card Front Panel Indicator Ethernet Line Cards Functional Description Page 40-Port Gigabit Ethernet (40x1GE) Line Card Page 8-Port 10-Gigabit Ethernet (8x10GE) 2:1 Oversubscribed Line Card 4-Port 10-Gigabit Ethernet (4x10GE) Line Card 2-28 Page 2-30 8-port 10-Gigabit Ethernet (8x10GE) 80-Gbps Line Rate Card Page 2-Port 10-Gigabit Ethernet + 20-port 1-Gigabit Ethernet (2x10GE + 20x1GE) Combination Line Card Page 2-34 16-port 10-Gigabit Ethernet (16x10GE) Oversubscribed Line Card Page 24-Port 10-Gigabit Ethernet Line Card Page 36-port 10-Gigabit Ethernet Line Card Page 2-port 100-Gigabit Ethernet Line Card 1-Port 100-Gigabit Ethernet Line Card Page Page Modular Line Cards 20-port Gigabit Ethernet Modular Port Adapter 8-port 10-Gigabit Ethernet Modular Port Adapter 4-Port 10-Gigabit Ethernet Modular Port Adapter 2-port 10-Gigabit Ethernet Modular Port Adapter 2-Port 40-Gigabit Ethernet Modular Port Adapter 1-Port 40-Gigabit Ethernet Modular Port Adapter Power System Functional Description 2-51 Figure 2-41 Cisco ASR 9010 Router AC Power System Block DiagramVersion 1 Power System 2-52 Figure 2-42 Cisco ASR 9010 Router AC Power System Block DiagramVersion 2 Power System 2-53 Figure 2-43 Cisco ASR 9010 Router DC Power System Block DiagramVersion 1 Power System 2-54 Figure 2-44 Cisco ASR 9010 Router DC Power System Block DiagramVersion 2 Power System 2-55 Figure 2-45 Cisco ASR 9006 Router AC Power System Block DiagramVersion 1 Power System 2-56 Figure 2-46 Cisco ASR 9006 Router AC Power System Block DiagramVersion 2 Power System 2-57 Figure 2-47 Cisco ASR 9006 Router DC Power System Block DiagramVersion 1 Power System 2-58 Figure 2-48 Cisco ASR 9006 Router DC Power System Block DiagramVersion 2 Power System 2-59 Figure 2-49 Cisco ASR 9904 Router AC Power System Block DiagramVersion 2 Power System 2-60 Figure 2-50 Cisco ASR 9904 Router DC Power System Block DiagramVersion 2 Power System 2-61 Figure 2-51 Cisco ASR 9922 Router AC Power System Block DiagramVersion 2 Power System 2-62 Figure 2-52 Cisco ASR 9922 Router DC Power System Block DiagramVersion 2 Power System Power Modules Power Module Status Indicators System Power Redundancy AC Power Trays 31 2 AC Tray Power Switch 1 2 43 AC Input Voltage Range AC System Operation Power Up Power Down DC Power Trays DC Tray Power Switch DC Power Tray Rear Panel DC Power Tray Power Feed Indicator 1 4 1 42 3 6 5 2 3 DC System Operation Power Up Power Down Cooling System Functional Description Cooling Path Page Page 2-74 Line cards Fan Trays Cisco ASR 9010 Router Fan Trays Cisco ASR 9006 Router Fan Trays Cisco ASR 9904 Router Fan Tray Cisco ASR 9922 Router and Cisco ASR 9912 Router Fan Trays Status Indicators Fan Tray Servicing Slot Fillers Chassis Air Filter Page Page Page Page Speed Control Temperature Sensing and Monitoring Servicing System Shutdown System Management and Configuration Cisco IOS XR Software System Management Interfaces Command-Line Interface Craft Works Interface SNMP SNMP Agent MIBs Online Diagnostics High Availability and Redundant Operation Features Overview High Availability Router Operations Stateful Switchover Fabric Switchover Active/Standby Status Interpretation Non-Stop Forwarding Nonstop Routing Graceful Restart Power Supply Redundancy AC Power Redundancy 3-5 DC Power Redundancy 3-7 2,100W DC system 1+1 min power redundancy Detection and Reporting of Power Problems Cooling System Redundancy Cooling Failure Alarm Page APPENDIX A Technical Specifications