2-21
Cisco ASR 9000 Series Aggregation Services Router Overview and Reference Guide
OL-17501-09
Chapter 2 Functional Description
Ethernet Line Cards

FC Card Front Panel Indicator

The front panel of the FC card has one tri-color LED indicator for system information.
Table 2-6 lists the display definitions of the discrete LED on the FC card front panel.
Ethernet Line Cards
Table 2-7 lists the Ethernet line cards available for the Cisco ASR 9000 Series Routers.
.
Table 2-6 FC Card LED Display Definitions
Indicator (Label) Color Description
Power Fail
(FAIL)
Green FC card powered on and FPGA is programmed.
Note Fabric Data Link failure is not detected so LED remains green.
Monitor CLI messages for status.
Red Fault or malfunction in FC card power up or FPGA programming.
Note Once any ejector lever release button is pushed in, the FC card must
be physically removed and reinserted (OIR) to restart the FC card.
During this time before the FC card is restarted, the LED is red.
Amber FC card powered on but fabric not active.
Off
(Default after reset)
FC card powered off via CLI.
Table 2-7 Ethernet Line Cards Available for the Cisco ASR 9000 Series Routers
Line Card Module Type
40-port Gigabit Ethernet (40x1GE) line card SFP1
8-port 10-Gigabit Ethernet (8x10GE) 2:1 oversubscribed line card XFP2
4-port 10-Gigabit Ethernet (4x10GE) line card XFP
8-port 10-Gigabit Ethernet (8x10GE) 80G line rate card XFP
2-port 10-Gigabit Ethernet plus 20-port Gigabit Ethernet (2x10GE + 20x1GE)
combination line card
XFP for 10GE ports
SFP for 1GE ports
16-port 10-Gigabit Ethernet (16x10GE) oversubscribed line card SFP+3
24-port 10-GE DX Line Card, Packet Transport Optimized Requires
SFP+ Modules
SFP+
24-port 10-GE DX Line Card, Service Edge Optimized Requires
SFP+ Modules
SFP+
36-port 10-GE DX Line Card, Packet Transport Optimized Requires
SFP+ Modules
SFP+
36-port 10-GE DX Line Card, Service Edge Optimized Requires
SFP+ Modules
SFP+
2-port 100-GE DX Line Card, Packet Transport Optimized Requires
CFP Modules
CFP4