802.11af/at

CDP (Cisco Discovery Protocol)

2.4 GHz and 5 GHz 802.11n radios with the following features:

3TX x 3RX

2 spatial streams, 300 Mbps PHY rate

DPD (Digital Pre-Distortion) technology

Radio hardware is capable of explicit compressed beamforming (ECBF) per 802.11n standard

3Safety Instructions

Translated versions of the following safety warnings are provided in the translated safety warnings document that is shipped with your access point. The translated warnings are also in the Translated Safety Warnings for Cisco Aironet Access Points, which is available on Cisco.com.

Warning

IMPORTANT SAFETY INSTRUCTIONS

Warning

Warning

Warning

This warning symbol means danger. You are in a situation that could cause bodily injury. Before you work on any equipment, be aware of the hazards involved with electrical circuitry and be familiar with standard practices for preventing accidents. Use the statement number provided at the end of each warning to locate its translation in the translated safety warnings that accompanied this device. Statement 1071

SAVE THESE INSTRUCTIONS

Read the installation instructions before you connect the system to its power source. Statement 1004

Installation of the equipment must comply with local and national electrical codes. Statement 1074

This product relies on the building’s installation for short-circuit (overcurrent) protection. Ensure that the protective device is rated not greater than:

20A. Statement 1005

3

Page 3
Image 3
Cisco Systems AIRSAP1602ITK9, AIRCAP1602IAK9, AIRCAP1602EAK9, AIRSAP1602IAK9 specifications Important Safety Instructions