2/4 | ||
|
|
|
2/4 | ||
|
| |
|
|
|
4/4 | ||
|
|
|
6/6 | ||
|
| |
|
|
|
Internal Antennas
The 1602I model access points are configured with up to three
Each antenna covers both the 2.4 GHz and the 5 GHz bands with a single feed line. The basic features are as follows:
•
•Antenna unit integrated into 1602I model access points.
•Peak gain is approximately 4 dBi in the
Regulatory Domains
The 1600 series supports the following regulatory domains (shown as “x” in the model numbers):
•
Countries Supported
Click this URL to browse to a list of countries and regulatory domains supported by the 1600:
www.cisco.com/go/aironet/compliance
6Access Point Ports and Connectors
The 1602E model access points have external antenna connectors and the LED indictor on the top of the model, as shown in Figure 1. The 1602I model access points have integrated antennas and do not have external connectors on the top of the unit; however, they do have the LED indicator on top of the unit, as shown in Figure 2.
6