Controller Overview
1/10G SFP+ Ports
The SFP and SFP+ modules provide copper or fiber-optic connections to other devices. These transceiver modules are field-replaceable, providing the physical interfaces when installed in an SFP module slot. The SFP modules have LC connectors for fiber-optic connections or RJ-45 connectors for copper connections.
Use only Cisco SFP and SFP+ modules on the controller.
Warning Class 1 laser product. Statement 1008
1/10G SFP+ port LED meanings:
•Off—The link is down.
•Green—The link is up and there is no activity.
•Blinking green—The link is up and there is activity.
•Amber—The link is disabled.
•Blinking amber—The link is off due to a fault or because a user- configurable limit has been exceeded.
Supported Cisco SFP and SFP+ modules are listed in Table 1 and Table 2.
| | | | Table 1 | Supported Cisco SFP Modules | |
| | | | | | | |
| | | | Part Number | | Description | |
| | | | | | |
| | | | GLC-GE-100FX= | 100FX SFP on GE SFP ports for LAN switches | |
| | | | | | | |
| | | | GLC-LH-SM= | | GE SFP, LC connector LX/LH transceiver | |
| | | | | | |
| | | | GLC-LH-SMD= | GE SFP, LC connector LX/LH transceiver, extended operating temperature | |
| | | | | | range | |
| | | | | | | |
| | | | GLC-SX-MM= | | GE SFP, LC connector SX transceiver | |
| | | | | | |
| | | | GLC-SX-MMD= | GE SFP, LC connector SX transceiver, extended operating temperature | |
| | | | | | range | |
| | | | | | | |
| | | | GLC-T= | | 1000BASE-T SFP transceiver module for copper connections | |
| | | | | | | |
| | | | GLC-ZX-SM= | | 1000BASE-ZX SFP module for SMF, 1550 nm | |
| | | | | | |
| | | | GLC-EX-SMD= | 1000BASE-EX SFP module for SMF, 1310 nm wavelength, extended | |
| | | | | | operating temperature range | |
| | | | | | | |
| | | | GLC-BX-D= | | 1000BASE-BX10 SFP module for single-strand SMF, 1490-nm TX, | |
| | | | | | 1310-nm RX wavelength | |
| | | | | | | |
| | | | GLC-BX-U= | | 1000BASE-BX10 SFP module for single-strand SMF, 1310-nm TX, | |
| | | | | | 1490-nm RX wavelength | |
| | | | | | |
| | | | CWDM-SFP-1470= | CWDM 1470-nm SFP Gigabit Ethernet and 1G/2G FC | |
| | | | | | |
| | | | CWDM-SFP-1490= | CWDM 1490-nm SFP Gigabit Ethernet and 1G/2G FC | |
| | | | | | |
| | | | CWDM-SFP-1510= | CWDM 1510-nm SFP Gigabit Ethernet and 1G/2G FC | |
| | | | | | |
| | | | CWDM-SFP-1530= | CWDM 1530-nm SFP Gigabit Ethernet and 1G/2G FC | |
| | | | | | |
| | | | CWDM-SFP-1550= | CWDM 1550-nm SFP Gigabit Ethernet and 1G/2G FC | |
| | | | | | |
| | | | CWDM-SFP-1570= | CWDM 1570-nm SFP Gigabit Ethernet and 1G/2G FC | |
| | | | | | |
| | | Cisco 5700 Series Wireless Controller Installation Guide | |
| | | |
| | | | | | | |
| 6 | | | | | OL-28544-01 | |
| | | | | |
