Chapter 2 Installing the Access Point

Mounting Overview

e.On power up, verify that the access point is associated to a controller and operating normally. The Power LED should be green, the Alarm LED should be off, and the radio LEDs should be blinking. For additional information, see the “Powering Up the Access Point” section on page 2-19.

Step 4 After all access points are deployed and operating correctly, ensure that a controller is not configured as a master controller. A master controller should only be used for configuring access points and not in a working network.

Mounting Overview

You can mount the access point on any of the following surfaces:

•Horizontal or vertical flat surfaces, such as walls or ceilings

•Suspended ceilings (above and below)

Caution The access point, the antennas, and the power source (power injector or power module) are not designed for outdoor use and must be located in an indoor environment.

Caution The power injectors and power modules should not be placed in a building’s environmental air space, such as above suspended ceilings.

Note The access point provides adequate fire resistance and low smoke-producing characteristics suitable for operation in a building's environmental air space (such as above suspended ceilings) in accordance with Section 300-22(C) of the National Electrical Code (NEC).

Note When mounting the access point in a building’s environmental air space, you must use only the metal projection-mount or the flush-mount brackets (not the plastic ceiling-mount base or the hanging-ceiling clips), and the access point must be powered using PoE. Also, only the integrated antennas can be used.

Note When mounting the access point in a building’s environmental air space, you must use Ethernet cable suitable for operation in environmental air space in accordance with Section 300-22(C) of the National Electrical Code (NEC).

The access point supports mounting hardware to allow wall, ceiling, or suspended ceiling mounting:

•Ceiling-mount base for mounting the access point to a horizontal surface–supplied with the access point (see Figure 2-5)

•Two suspended ceiling hanging-clips for mounting the access point below a suspended ceiling–supplied with the access point (see Figure 2-6)

•Metal projection-mount bracket (user orderable) for mounting the access point to a vertical wall (see Figure 2-6)

Cisco Aironet 1000 Series Lightweight Access Point Hardware Installation Guide

2-8

OL-9403-04

 

 

Page 27 Page 29
Page 28
Image 28
Cisco Systems AIRONET 1000 manual Mounting Overview
Page 27 Page 29

AIRONET 1000 specifications

Cisco Systems AIRONET 1000 is a robust wireless access point designed to meet the demands of modern networking environments. This product is particularly beneficial for small to medium-sized businesses seeking to enhance their wireless connectivity while ensuring reliability and security.

One of the standout features of the AIRONET 1000 is its dual-band functionality, operating effectively on both the 2.4 GHz and 5 GHz bands. This capability allows for greater flexibility and improved performance, as users can connect to the least congested frequency for their specific needs. Additionally, the access point supports multiple-input and multiple-output (MIMO) technology, which improves signal quality and enhances data rates by utilizing multiple antennas to transmit and receive data simultaneously.

The AIRONET 1000 is equipped with Cisco's CleanAir technology, providing powerful interference management. This innovation automatically identifies and mitigates sources of wireless interference, ensuring a more stable and consistent connection. Security is another critical aspect of this access point; it includes advanced features such as Wi-Fi Protected Access (WPA), which safeguards network data through encryption protocols, thus protecting sensitive information from unauthorized access.

Furthermore, the Cisco Systems AIRONET 1000 integrates seamlessly with Cisco’s DNA software, allowing for advanced networking capabilities such as network automation, analytics, and security policy enforcement. The access point also supports Power over Ethernet (PoE), simplifying installation by enabling power and data connectivity through a single cable, reducing clutter while enhancing deployment flexibility.

With its lightweight design and compact form factor, the AIRONET 1000 is easy to install and can be placed in various locations, ensuring optimal coverage across an area. Whether in an office, retail space, or educational institution, this access point is built to deliver high-performance wireless connectivity.

In conclusion, the Cisco Systems AIRONET 1000 combines advanced wireless technologies, security features, and ease of deployment, making it a highly effective solution for any organization looking to improve its wireless network infrastructure. Its ability to handle current demands while being scalable for future growth reflects Cisco's commitment to providing reliable and efficient networking results.
Top Page Image Contents