2-14
Cisco Aironet 1000 Series Lightweight Access Point Hardware Installation Guide
OL-9403-04
Chapter2 Installing the Access Point
Mounting Overview
Figure2-11 Attaching the Access Point to the Projection-Mount Bracket
Step7 Attach the cables to the sides of the access point. The E ther net c able, optio nal external antenna cable(s),
optional power supply cable, and optional Kensington MicroSaver security cables can be routed thr ough
the large holes in the mounting bracket.
Note Ensure that the cables are routed away from the access point integrated antennas.
Note When the access point is powered up and is associated with a controller (Power LED is green,
2.4 GHz LED is yellow, and 5.4 GHz LED is amber), the access point is broadcasting its beacon.
Step8 Repeat Steps 1 to 7 for each projection-mount bracket location.
After mounting all your projection-mount access points, return to deploying th e access points, "Step 3-c"
on page 2-7.
135671