Cisco Systems AIRONET 1000 manual Power output settings CCK

Appendix C Access Point Specifications

Table C-1	Access Point Specifications (continued)
		Specifications
Category		802.11b	802.11g	802.11a
Power output settings CCK			OFDM	OFDM
		100, 50, 12.5, and 6.25 percent settings on the controller
		100 mW (20 dBm) conducted	50 mW (17 dBm) conducted
		Maximum output power depends on the regulatory domain in which the access point is installed
Antenna		AIR-AP1010

•Two integrated 6 dBi patch antennas (2.4 and 5 GHz) AIR-AP1020 and AIR-AP1030

•Two integrated 6 dBi patch antennas (2.4 and 5 GHz)

•Three external antenna connectors

Frequency	2.400 to 2.497 GHz			5.15 to 5.25 GHz
	(Depending on the regulatory domain in which the access point is			5.25 to 5.35 GHz
	installed)			5.475 to 5.725 GHz
				5.725 to 5.85 GHz
				(Depending on the regulatory
				domain in which the access point
				is installed)
Data rates	1, 2, 5.5, and 11 Mbps		6, 9, 12, 18, 24, 36, 48, and 54 Mbps
Typical indoor range	160 ft (49 m) @ 11 Mbps		90 ft (27 m) @ 54 Mbps	45 ft (14 m) @ 54 Mbps
(across open office	410 ft (125 m) @ 1 Mbps		180 ft (100 m) @ 18 Mbps	110 ft (34 m) @ 18 Mbps
environment)			300 ft (91 m) @ 6 Mbps	165 ft (50 m) @ 6 Mbps
Compliance	The 1000 series access point complies with UL 2043 for products installed in a building’s
	environmental air handling spaces, such as above suspended ceilings.
	Caution The power injector and power module have not been tested to UL 2043 and they should not
		be placed in a building’s environmental air space, such as above suspended ceilings.
Safety	Designed to meet:
	IEC 60950-1
	UL 60950-1
	CSA 60950-1
	EN 60950-1
	UL 2043
Radio Approvals	FCC Parts 15.247			FCC Part 15.407
	Canada RSS-210			Canada RSS-210
	Japan ARIB-STD-33A			Japan ARIB STD-T71
	Japan ARIB-STD-66			EN 301.893
	Europe EN-300.328

Cisco Aironet 1000 Series Lightweight Access Point Hardware Installation Guide

C-2 OL-9403-04