Cisco Systems ASA 5500 manual •SFP modules

Chapter 4 Connecting Interface Cables

Connecting Cables to Interfaces

•SFP modules

–Insert and slide the SFP module into the SFP port until you hear a click. The click indicates that the SFP module is locked into the port.

–Remove the optical port plugs from the installed SFP as shown in Figure 4-5.

Figure 4-5

1

Removing the Optical Port Plug

2 143146

1

Optical port plug

2

SFP module

–Connect the LC connector to the SFP module as shown in Figure 4-6.

	Cisco ASA 5500 Series Adaptive Security Appliance Getting Started Guide
78-17611-01		4-7