Cisco Systems ASA 5500 manual In the Interface and Action area, 6-20

Chapter 6 Scenario: DMZ Configuration

Configuring the Security Appliance for a DMZ Deployment

Step 2 In the Interface and Action area:

a.From the Interface drop-down list, choose Outside.

b.From the Direction drop-down list, choose Incoming.

c.From the Action drop-down list, choose Permit.

Step 3 In the Source area:

a.From the Type drop-down list, choose IP Address.

b.Enter the IP address of the source host or source network. Use 0.0.0.0 to allow traffic originating from any host or network.

	Cisco ASA 5500 Series Adaptive Security Appliance Getting Started Guide
6-20	78-17611-01