Cisco Systems ASA 5500 manual Scenario DMZ Configuration

Contents

C H A P T E R 4 Connecting Interface Cables 4-1

Connecting Cables to Interfaces 4-2

What to Do Next 4-10

C H A P T E R 5 Configuring the Adaptive Security Appliance 5-1

About the Factory-Default Configuration 5-1

About the Adaptive Security Device Manager 5-2

Before Launching the Startup Wizard 5-3

Using the Startup Wizard 5-4

What to Do Next 5-5

C H A P T E R	6	Scenario: DMZ Configuration 6-1
		Example DMZ Network Topology 6-1
		Configuring the Security Appliance for a DMZ Deployment		6-4
		Configuration Requirements 6-5
		Starting ASDM 6-6
		Creating IP Pools for Network Address Translation	6-7
		Configuring NAT for Inside Clients to Communicate with the DMZ Web
		Server 6-12
		Configuring NAT for Inside Clients to Communicate with Devices on the
		Internet 6-15
		Configuring an External Identity for the DMZ Web Server 6-16
		Providing Public HTTP Access to the DMZ Web Server		6-18
		What to Do Next 6-24
		Scenario: Remote-Access VPN Configuration 7-1
C H A P T E R	7
		Example IPsec Remote-Access VPN Network Topology	7-1
		Implementing the IPsec Remote-Access VPN Scenario	7-2

	Information to Have Available	7-3
	Cisco ASA 5500 Series Adaptive Security Appliance Getting Started Guide
iv		78-17611-01