Cisco Systems ASA 5505BUNK9, ASA5505BUNK9, ASA5505K8RF manual 3-11, Figure, FIPS Enclosure

Chapter 3 Installing the Cisco ASA 5505

Rack or Wall Mounting the Cisco ASA 5505

Installing and Wall-Mounting the Cisco ASA 5505 FIPS Enclosure

Figure 3-9shows the FIPS enclosure for the Cisco ASA 5505.

Figure 3-9 FIPS Enclosure

272363

To install and wall-mount the Cisco ASA 5505 FIPS enclosure, perform the following steps:

Step 1 Choose a wall where you would like to mount the Cisco ASA 5505.

Step 2 Using the FIPS enclosure as a template, use a pencil to mark the location for the four plastic anchors, used to secure the adaptive security appliance to the wall. Make sure all the pencil marks are located in the center as shown in Figure 3-10.

	Cisco ASA 5505 Adaptive Security Appliance Hardware Installation Guide
OL-18362-01		3-11