Cisco Systems ASA5505K8RF, ASA 5505 Power Supply Disconnection Warning, Jewelry Removal Warning

About This Guide

•Blank Faceplates and Cover Panels Warning, page viii

•Product Disposal Warning, page viii

•Short-Circuit Protection Warning, page ix

•Compliance with Local and National Electrical Codes Warning, page ix

•DC Power Connection Warning, page ix

•AC Power Disconnection Warning, page ix

•TN Power Warning, page ix

•48 VDC Power System, page ix

•Multiple Power Cord, page ix

•Circuit Breaker (15A) Warning, page ix

•Grounded Equipment Warning, page x

•Safety Cover Requirement, page x

•Faceplates and Cover Panel Requirement, page x

Power Supply Disconnection Warning

Warning Before working on a chassis or working near power supplies, unplug the power cord on AC units; disconnect the power at the circuit breaker on DC units. Statement 12

Jewelry Removal Warning

Warning Before working on equipment that is connected to power lines, remove jewelry (including rings, necklaces, and watches). Metal objects will heat up when connected to power and ground and can cause serious burns or weld the metal object to the terminals. Statement 43

Wrist Strap Warning

Warning During this procedure, wear grounding wrist straps to avoid ESD damage to the card. Do not directly touch the backplane with your hand or any metal tool, or you could shock yourself. Statement 94

Work During Lightning Activity Warning

Warning Do not work on the system or connect or disconnect cables during periods of lightning activity. Statement 1001

Installation Instructions Warning

Warning Read the installation instructions before connecting the system to the power source. Statement 1004

Cisco ASA 5505 Adaptive Security Appliance Hardware Installation Guide

OL-18362-01 vii