Chapter 2 Preparing for Installation

Safety and Compliance

Following are guidelines for preventing ESD damage:

Always use an ESD-preventive wrist or ankle strap and ensure that it makes good skin contact. Connect the equipment end of the connection cord to bare metal on the router chassis. (See Figure 2-1.)

Attach an ESD-preventive wrist strap to your wrist, and to the chassis or to a bare metal surface. (See Figure 2-1.)

The wrist strap protects equipment from ESD voltages on the body only; ESD voltages on clothing can still cause damage to electronic components.

Caution To avoid ESD damage to the equipment, periodically check the resistance value of the ESD-preventive wrist strap. The resistance measurement should be between 1 and 10 megohms (Mohms).

Figure 2-1 Attaching an ESD-Preventive Strap

CONSOLE AUX

RESET

 

AC OK

 

DC OK

 

OTF

 

AC OK

 

DC OK

DON

OTF

R

NOT REMOVE

ITHINSERT CABLES

 

THE POWER ON

INPUT 100-200- 50/60Hz 2-5A

57849

When installing the card, confirm that the card is fully seated in the midplane and tighten the spring-loaded screws. These screws prevent accidental removal, provide proper grounding for the system, and help ensure that the connectors are seated in the midplane. (See Figure 2-1and the “Figure 3-6Disconnecting the Optical Interface Cable” section on page 3-6.)

When removing the card, use the spring-loaded screws to unseat the card connector from the midplane. (See Figure 3-10and the “Figure 3-6Disconnecting the Optical Interface Cable” section on page 3-6.)

Handle the card by the spring-loaded screws only; avoid touching the board or connector pins.

Place the card board-side-up on an antistatic surface or in a static shielding bag. If you plan to return the card to the factory, immediately place it in a static shielding bag.

Avoid contact between the card and clothing. The wrist strap protects the board only from ESD voltages on the body; ESD voltages on clothing can still cause damage.

 

 

Book Title

 

 

 

 

 

 

78-13113-06 B0

 

 

2-5

 

 

 

 

 

Page 31
Image 31
Cisco Systems CISCO10720 manual Attaching an ESD-Preventive Strap

CISCO10720 specifications

Cisco Systems CISCO10720 is an advanced router designed to cater to the demands of service providers and large enterprises. Known as the Cisco 10720, this device features a highly efficient architecture that allows for high-speed data transport and optimized network performance. Its core purpose is to facilitate effective broadband services, including Internet Protocol (IP) data, voice, and video services.

One of the standout features of the Cisco 10720 is its modularity. This router supports various interface modules, allowing users to customize their hardware based on specific network needs. The ability to mix and match different modules ensures that clients can adapt the router to future requirements without needing to invest in an entirely new system.

The Cisco 10720 is built on high-performance forwarding capabilities, which is driven by its advanced chipset. This ensures low latency and high throughput, which are essential for applications requiring real-time communication, such as VoIP and streaming video. The system architecture is designed to manage and prioritize traffic effectively, utilizing Quality of Service (QoS) mechanisms to enhance user experience.

Security is another critical characteristic of the Cisco 10720. It offers robust security features, including access control lists (ACLs), encryption protocols, and network address translation (NAT) functionalities, ensuring that data remains secure as it traverses the network. These features help protect against a variety of threats while maintaining compliance with industry standards.

Moreover, the router supports various LAN and WAN technologies, making it versatile for different networking environments. It accommodates technologies such as MPLS, which enhances routing efficiency and supports better service level agreements (SLAs).

Another significant aspect of the Cisco Systems CISCO10720 is its scalability. The router is designed to handle growing bandwidth requirements effectively, accommodating an increasing number of connected devices and users. This flexibility is vital for businesses that may experience rapid growth or fluctuating network demands.

In summary, the Cisco Systems CISCO10720 stands out as a robust solution for enterprises and service providers looking to enhance their network capabilities. With its modular design, high-performance architecture, strong security features, support for various technologies, and scalability, the CISCO10720 is well-equipped to meet the challenges of modern networking environments.