Cisco Systems CISCO10720 Installing and Removing the Uplink Cards, Tools and Equipment Required

C H A P T E R 3

Installing and Removing the Uplink Cards

This chapter provides information about installing and removing the uplink cards. The following sections are in this chapter:

•Tools and Equipment Required, page 3-1

•Preparing for Installation, page 3-2

•Removing the Cable-Management System, page 3-4

•Removing the Uplink Card, page 3-8

•Installing an Uplink Card, page 3-9

•SONET Distance Information for RPR/SRP, DPT, and POS/DPT Uplink Cards, page 3-11

•Connecting the Ports on the RPR/SRP, DPT, and POS/DPT Uplink Cards, page 3-12

•Installing the Cable-Management System, page 3-15

•Turning On Power to the Router, page 3-16

•Verifying Uplink Card Functionality, page 3-23

•Configuring the RPR/SRP, DPT, and POS/DPT Uplink Card Interfaces, page 3-23

Tools and Equipment Required

The following tools are required to install or remove an uplink card on the Cisco 10720 Internet Router:

•ESD-preventive wrist strap

•1/8-inch flat-blade screwdriver

•Number 1 Phillips screwdriver

•Antistatic bag

•Cable ties

•Antistatic mat (optional)

•Uplink card

	Book Title
78-13113-06 B0		3-1