CONFIGURE YOUR ROUTER
Figure 2 | SDP Authentication |
If you’re using DHCP, to initiate the SDP process, go to the PC which is connected to the CVO router and open a browser window. Then type in the address bar: http://10.10.10.1/ezsdd/welcome. You will be prompted to authenticate, and you must use username/password cisco/cisco.
You will see the screen shown in Figure 3 while the router prepares for the rest of the SDP process.
Figure 3 | SDP Screen |
Step 3 Securely download the CVO router configuration.
When the screen refreshes you will notice a field for site URL. Enter the URL provided by your network administrator (Figure 4).
Cisco Virtual Office – End User Instructions for Cisco 1811 Router Set Up at Home or Small Office
4 |
| |
|
