Cisco Systems CSACS1121UPK9 manual Prompt Default Conditions Description, Localhost

Chapter 5 Installing and Configuring the Cisco Secure Access Control System with CSACS-1121

Installing the ACS Server

Note			You can interrupt the setup process at any time by typing Ctrl-Cbefore the last setup value is entered.
Table 5-1	Network Configuration Parameters
Prompt		Default		Conditions	Description
Host Name		localhost		First letter must be an ASCII character.	Enter the hostname.
				Length must be from 3 to 15 characters.
				Valid characters are alphanumeric (A-Z,
				a-z, 0-9), hyphen (-), and the first
				character must be a letter.
IPV4 IP Address		None, network specific		Must be a valid IPv4 address between	Enter the IP address.
				0.0.0.0 and 255.255.255.255.
IPv4 Netmask		None, network specific		Must be a valid IPv4 address between	Enter a valid netmask.
				0.0.0.0 and 255.255.255.255.
IPv4 Gateway		None, network specific		Must be a valid IPv4 address between	Enter a valid default gateway.
				0.0.0.0 and 255.255.255.255.
Domain Name		None, network specific		Cannot be an IP address.	Enter the domain name.
				Valid characters are ASCII characters, any
				numbers, hyphen (-), and period (.).
IPv4 Primary Name		None, network specific		Must be a valid IPv4 address between	Enter a valid name
Server Address				0.0.0.0 and 255.255.255.255.	server address.
Add/Edit another		None, network specific		Must be a valid IPv4 address between	To configure multiple name
nameserver				0.0.0.0 and 255.255.255.255.	servers, enter Y.

Installation and Upgrade Guide for the Cisco Secure Access Control System 5.2

OL-21574-01 5-3