Cisco Systems DPC3008CC manual Installing the modem, Connect devices to the modem, Dimensions

Linksys DPC3008/EPC3008

Dimensions

Use this illustration as a guide for mounting the modem to the wall.. (Image not to scale)

Installing Your Modem

Mounting the modem to the wall

1.Using a drill with a 3/16-inch bit, drill two holes at the same height and 4 inches apart..

2.Are you mounting the modem into a drywall or concrete surface where a wooden stud is available?

•• If yes, go to Step 3..

•• If no, drive the anchor bolts into the wall, and install the mounting screws into the anchor bolts.. Leave a gap of about 1/4 inch between the screw head and the wall.. Then, go to Step 4..

3.Install the mounting screws into the wall.. Leave a gap of about 1/4 inch between the screw head and the wall.. Then, go to Step 4..

4.Verify that no cables or wires are connected to the modem..

5.Lift the modem into position.. Slip the large end of both mounting slots over the mounting screws, and then slide the modem down until the narrow end of the keyhole slot contacts the screw shaft..

important

Verify that the mounting screws securely support the modem before you let go of the modem..

Contact your service provider for more information about installation..

Installing the modem

This section describes how to connect your modem to support the services that the modem offers..

Connect devices to the modem

The following illustration shows many of the possible connections that can be made to your modem..

If your modem supports high-speed Internet service, you can share that Internet connection with other Internet devices in your home or office.. Sharing one connection among many devices is called networking..

12