Cisco Systems Engine 611 manual Contents, Safety Overview, Obtaining Technical Assistance, page

Installing Hard Disk Drives in the Cisco Wide Area Application Engine 611

Product Numbers: DISK-611SC-144GB=, DISK-611SC-300GB=

This publication provides basic instructions for installing SCSI hard disk drive options in the Wide Area Application Engine 611 (WAE-611). These instructions are intended for experienced technicians.

Contents

This publication contains the following sections:

•Safety Overview, page 1

•Introduction, page 3

•Removing the Bezel and Cover, page 4

•Assigning SCSI IDs, page 6

•Removing and Replacing a SCSI Hard Disk Drive, page 7

•Replacing the Cover and Bezel and Completing the Installation, page 9

•Obtaining Documentation, page 10

•Cisco Product Security Overview, page 10

•Obtaining Technical Assistance, page 11

Note For translations of the warnings in this publication, see the “Related Documentation” section on page 3.

Safety Overview

Safety warnings appear throughout this publication in procedures that may harm you if performed incorrectly. A warning symbol precedes each warning statement.

Corporate Headquarters:

Cisco Systems, Inc., 170 West Tasman Drive, San Jose, CA 95134-1706 USA

© 2005 Cisco Systems, Inc. All rights reserved.