Back Panel Descriptions
Feature |
| Description | |
|
|
| |
ANT01/ANT02 | Threaded connectors for the antennas (for ISA550W and | ||
|
|
| ISA570W only). |
|
|
|
|
USB Port |
| Connects the unit to a USB device. You can use a USB | |
|
|
| device to save and restore system configuration, or to |
|
|
| upgrade the firmware. |
|
|
| |
Configurable | Can be set to operate as WAN, LAN, or DMZ ports. The | ||
Ports |
| ISA550 and ISA550W have 4 configurable ports. The | |
|
|
| ISA570 and ISA570W have 5 configurable ports. |
|
|
| NOTE Only one configurable port can be configured as a |
|
|
| WAN port at a time. Up to 4 configurable ports can be |
|
|
| configured as DMZ ports. |
|
|
| |
LAN Ports | Connects PCs and other network appliances to the unit.The | ||
|
|
| ISA550 and ISA550W have 2 dedicated LAN ports. The |
|
|
| ISA570 and ISA570W have 4 dedicated LAN ports. |
|
|
| |
WAN Port | Connects the unit to a DSL or cable modem, or other WAN | ||
|
|
| connectivity device. |
|
|
| |
RESET Button | To reboot the unit, push and release the RESET button for | ||
|
|
| less than 3 seconds. |
|
|
| To restore the unit to its factory default settings, push and |
|
|
| hold the RESET button for a minimum of 3 seconds while |
|
|
| the unit is powered on. The POWER/SYS light will flash |
|
|
| green when the system is rebooting. |
|
|
| |
Power Switch | Powers the unit on or off. | ||
|
|
| |
Power Connector | Connects the unit to power using the supplied power cord | ||
|
|
| and adapter. |
|
|
|
|
|
| Mounting the Cisco ISA500 Series | |
3 |
| ||
| Integrated Security Appliances | ||
You can place your security appliance on a desktop, mount it on a wall, or mount it in a rack.
Placement Tips
•Ambient Temperature: To prevent the security appliance from overheating, do not operate it in an area that exceeds an ambient temperature of 104°F (40°C).
•Air Flow: Be sure that there is adequate air flow around the security appliance.
6 | Cisco ISA500 Series Integrated Security Appliances Quick Start Guide |
