Cisco Systems MGX 8850 System manual Underside of chassis

Step 5 Align the two cutouts on the plastic cover with the two sheetmetal flanges located directly behind the backplane. Make sure the three tabs on the plastic cover are hooked inside the sheet metal flange.

43777

Underside of chassis

Warning A high-energy hazard exist in the system while it is running. Be careful not to let your fingers or thumb touch the motherboard. Do not wear loose clothing or jewelry, such as rings, bracelets, or chains while performing this installation.

Installing Plastic Motherboard Insulator in an MGX 8850 System

3 78-10389-01