Step 6 Press the center of the plastic cover to snap the tabs into the card cage perforations as shown in the illustration below. Keep the plastic cover between your fingers and the motherboard.
43779
Underside of chassis
Step 7 Continue to press the plastic cover starting from the center then moving to each outside edge to snap the remaining tabs. You should be able to hear an audible click as these tabs are snapped into place.
Step 8 Replace the plastic grill removed in Step 1 and secure with the two screws using a flat blade screw driver.
This completes the installation of the plastic insulating cover.
Installing Plastic Motherboard Insulator in an MGX 8850 System
4 |
| |
|
