11-13
Cisco IP Solution Center L2VPN and Carrier Ethernet User Guide, 6.0
OL-21636-01
Chapter 11 Deploying, Monitoring, and Auditing Service Requests
Auditing Service Requests
Step 1 Choose Service Inventory > Inventory and Connection Manager > Service Requests.
The Service Requests window appears.
Step 2 Choose an service request for the configuration audit.
Step 3 Click Details.
The Service Request Details window appears.
Step 4 Click Audit.
Step 5 Click Config.
The Service Request Audit window appears. Figure 11-13 shows an example of a successful
configuration audit.
Figure 11-13 Service Request Audit Report—Successful
This window lists the device name and role, and a message regarding the status of your configuration
audit.
If the audit is unsuccessful, the message field lists details on the failed audit. Figure 11-14 shows an
example of a failed audit message for an se rvice request.
Figure 11-14 Service Request Audit Report—Failed
The audit failure message indicates missing commands and configuration i ssues. Carefully review the
information in the message field. If the audit fails, you must correct all errors an d redeploy the service
request.
Step 6 Click OK to return to the Service Request Details window.