Cisco Systems OL-5512-01 manual Adding Routers in Network Configuration, C H A P T E R

C H A P T E R 6

Adding Cisco IOS Routers to Cisco WAPMS

This chapter explains how to add Cisco IOS-based routers to Cisco WAPMS using the Network Configuration application in the PAC.

For more information about using Network Configuration, see Chapter 3, “Network Configuration,” in the Cisco WAN Access Performance Management System Client User Guide, 2.1.

The following topics are discussed in this chapter:

•“Adding Routers in Network Configuration”

•“Configuring ATM and Frame Relay Circuits” section on page 6-5.

Note Throughout the Cisco WAPMS documentation, the term ASE refers to Cisco routers running SAA-ATM/FR and/or Visual Networks ASE probes.

Adding Routers in Network Configuration

In order for Cisco WAPMS to recognize Cisco routers, you must add them to your network using the Cisco WAPMS PAC Network Configuration Toolset. All configuration tasks for networks, sites, access lines, ASEs (and routers), and circuits are initiated from the Network Configuration window. See Figure 6-1.

Cisco WAN Access Performance Management System User Guide, 2.1

OL-5512-01 6-1