Cisco Systems OL-6109-01 manual Zone Detection Verification, 4-21

Chapter 4 Zone Configuration

Zone Detection

Where:

–all-zone—The Detector activates the Guard to assume protection over the overall zone whenever a traffic abnormality is detected (see this section’s explanation for further details).

–only-dest-ip—The Detector activates the Guard protection over a particular zone once a traffic abnormality can be traced as destined to that particular zone (see this section’s explanation for further details).

–policy-type—The Detector activates the Guard protection over a particular zone once a traffic abnormality can be traced as destined to that particular zone (see this section’s explanation for further details).

2.Choose ENTER.

Zone Detection Verification

The user may wish now to issue the show counters command to display the zone status to verify that the detection process is functioning properly.

To verify that the zone detection is functioning properly perform the following:

1.From the Zone command group level type the following:

admin@DETECTOR-conf-zone-<zone-name># show counters [history]

Where history displays the Received counter values for every minute in the past hour. The counter is measured in packets and in Kbits.

Note By default, only the current counter is displayed.

2.Choose ENTER. The following (sample) screen appears:

admin@DETECTOR-conf-zone-scannet# show counters history

Time					Received(Pkts)	Received(KBits)
current					239298	1159253
Oct 23		2003		00:57:53 148744		664494
Oct	23		2003	00:56:53	148744	664494
Oct	23		2003	00:55:54	148744	664494

... ... ...

admin@DETECTOR-conf-zone-scannet#

	Cisco Traffic Anomaly Detector User Guide
OL-6109-01		4-21