Cisco Systems OL-6109-01 manual Duplicating a Zone

Chapter 4 Zone Configuration

Basic Zone Configuration

Note If no zone template is specified, the zone will be defined using the Detector DEFAULT zone template.

–base-zone-name—(Optional) The name of a desired zone used as a template for the new zone.

–interactive—(Optional) The operation mode of the new zone is set to interactive (see the “Interactive Recommendations Mode” section for further details).

Note Choosing Enter without specifying the zone template defines a zone by the Detector default zone template.

2.Choose ENTER. Below is an example of the zone command implementation:

admin@DETECTOR-conf# zone scannet admin@DETECTOR-conf-zone-scannet#

Duplicating a Zone

The user may duplicate a desired zone and define a new, identically- configured, zone.

To duplicate a zone from the Configuration command group level perform the following:

1.From the Configuration command group level type the following:

admin@DETECTOR-conf# zone <new-zone-name> copy-from<base-zone-name>

Where:

–new-zone-name—A zone name string. An alphanumeric string should start with a letter, hold no spaces, and should be limited to a length of up to 63 characters. The string may contain underscores.

–base-zone-name—The name of a desired zone used as a template for the new zone.

	Cisco Traffic Anomaly Detector User Guide
OL-6109-01		4-3