b.Click the Range radio button to enter the IP address range.
c.Because the range of IP addresses for the DMZ interface is 30.30.30.50– 30.30.30.60, enter these values in the two fields.
d.Enter a unique Pool ID (in this case, enter 200).
e.Click the OK button to go back to the Manage Global Address Pools window.
Note You can also select PAT or PAT using the IP address of the interface if there are limited IP addresses available for the DMZ interface.
Because there are only two public IP addresses available, with one reserved for the DMZ server, all traffic initiated by the inside HTTP client exits the PIX 515E using the outside interface IP address. This allows traffic from the inside client to be routed to and from the Internet.
In the Manage Global Address Pools window:
a.Select the outside interface.
b.Click the Add button.
9
