show controller
show controller cable-modem bpkm
To display information about the baseline privacy key management exchange between the cable modem and the headend CMTS, use the show controller
show controller cable-modem number bpkm
Syntax Description
number | Controller number inside the cable modem. |
Command Mode
Privileged EXEC
Usage Guidelines
This command first appeared in Cisco IOS Release 11.3 NA.
Sample Display
The following output is displayed when the headend CMTS does not have baseline privacy enabled:
uBR904# show controller
CM Baseline Privacy | Key Management |
| |
configuration (in | seconds): |
| |
authorization wait time: | 10 | ||
reauthorization wait time: | 10 | ||
authorization grace time: | 600 | ||
operational wait time: | 1 | ||
rekey wait time: | 1 | ||
tek grace time: | 600 | ||
authorization rej wait time: 60 | |||
kek state: | STATE_B_AUTH_WAIT |
| |
sid 4: |
|
|
|
tek state: No resources assigned
Related Commands
show controller
show controller
show controller
Troubleshooting Tips for the Cisco uBR904 Cable Modem 19