Cisco Systems UBR904 no debug cable-modem bpkm errors events packets, Syntax Description

debug cable-modem bpkm

debug cable-modem bpkm

To debug baseline privacy information on a cable modem, use the debug cable-modem mac

Privileged EXEC command. The no form of this command turns debugging messages off.

[no] debug cable-modem bpkm {errors events packets}

Syntax Description

errors	Debugs cable modem privacy errors.
events	Debugs events related to cable baseline privacy.
packets	Debugs baseline privacy packets.

Command Mode

Privileged EXEC

Usage Guidelines

This command first appeared in Cisco IOS Release 11.3 NA.

Sample Display

Figure 3 shows the required keywords within the debug cable-modem bpkm command. You must choose one.

Figure 3 Sample Debug Cable-Modem Bpkm Output

uBR904# debug cable-modem		bpkm	?
errors	Cable Modem privacy		errors
events	events related	to cable baseline privacy
packets	baseline privacy packets

Figure 4 shows output when the headend does not have privacy enabled.

Figure 4 Sample Debug Cable-Modem Bpkm Output

uBR904# debug cable bpkm

cm_bpkm_fsm(): machine: KEK, event/state: EVENT_4_TIMEOUT/STATE_B_AUTH_WAIT, new state:

STATE_B_AUTH_WAIT

cm_bpkm_fsm(): machine: KEK, event/state: EVENT_4_TIMEOUT/STATE_B_AUTH_WAIT, new state:

STATE_B_AUTH_WAIT

%LINEPROTO-5-UPDOWN: Line protocol on Interface cable-modem0, changed state to down

cm_bpkm_fsm(): machine: KEK, event/state: EVENT_1_PROVISIONED/STATE_A_START, new state:

STATE_B_AUTH_WAIT

%LINEPROTO-5-UPDOWN: Line protocol on Interface cable-modem0, changed state to up

Troubleshooting Tips for the Cisco uBR904 Cable Modem 43