Cisco Systems UBR904 manual Use Additional Troubleshooting Commands

Models: UBR904

1 54
Download 54 pages 54.01 Kb
Page 15
Image 15
Event 11—Enter the Maintenance State

Use Additional Troubleshooting Commands

Event 11Enter the Maintenance State

As soon as the cable modem is completely up and running, it enters the operational maintenance state.

508178.322 CMAC_LOG_STATE_CHANGE

maintenance_state

Use Additional Troubleshooting Commands

You can use other show controller and debug cable modem commands to troubleshoot different aspects of a cable modem. However, the most useful command is the show controller cable-modem 0 mac command.

To display additional controller information inside a cable modem, enter one or more of the following commands in Privileged EXEC mode:

Command

Purpose

show controller cable-modem

Displays high-level controller information.

 

 

show controller cable-modem bpkm

Displays privacy state information.

 

 

show controller cable-modem des

Displays information about the Data Encryption

 

Standard (DES) engine registers.

 

 

show controller cable-modem filters

Displays information about the MAC and SID cable

 

modem filters.

 

 

show controller cable-modemlookup-table

Displays the mini-slot lookup table inside a cable

 

modem.

 

 

show controller cable-modem mac [errors hardware

Displays detailed MAC layer information.

log resets state]

 

 

 

show controller cable-modem phy

Displays physical layer information, such as receive

 

and transmit physical registers.

 

 

show controller cable-modem tuner

Displays tuning information.

 

 

To debug different components of a cable modem, enter one or more of the following commands in Privileged EXEC mode:

Command

Purpose

debug cable-modem bpkm {errors events packets}

Debugs baseline privacy information.

 

 

debug cable-modem bridge

Debugs the bridge filter.

 

 

debug cable-modem error

Debugs cable interface errors.

 

 

debug cable-modem interrupts

Debugs cable modem interface interrupts.

 

 

debug cable-modem mac {log [verbose] messages}

Displays and debugs the MAC layer log entries in

 

real time.

 

 

debug cable-modem map

Debugs map message processing information.

 

 

Troubleshooting Tips for the Cisco uBR904 Cable Modem 15

Page 15
Image 15
Cisco Systems UBR904 manual Use Additional Troubleshooting Commands, Event 11-Enter the Maintenance State