Cisco Systems Version 5.2 78-11180-01 Opening a PIX10000, Closing a PIX 510 and PIX 520 Chassis

Chapter 5 Opening a PIX Firewall Chassis

Opening a PIX10000

Closing a PIX 510 and PIX 520 Chassis

Replace the top panel, as shown in Figure 5-6,and secure it with the three screws you removed in Step 3 in the previous section.

Figure 5-6 Replacing the Top Panel

10380

RESET

PIX Firewall SERIES

Opening a PIX10000

Follow these steps to open a PIX10000 chassis:

Step 1 Power off the unit from the rear panel.

Step 2 Remove the four screws from the top panel at the rear of the unit.

Step 3 Grasp the top panel with both hands as shown in Figure 5-7and pull the top panel backward one inch toward the rear of the cabinet and then lift the top panel straight up.

Figure 5-7 Opening the PIX10000 Chassis

H10128

Installation Guide for the Cisco Secure PIX Firewall Version 5.2

78-11180-01 5-5