Manuals / Cisco Systems / Computer Equipment / Computer Hardware

Cisco Systems WS-X3500-XL manual Removing a GigaStack Gbic

Models: WS-X3500-XL

1 58
Download 58 pages 28.42 Kb
Page 45
Image 45

Chapter 2 Installation

Removing a GigaStack GBIC

Caution A loop causes excessive collision errors on the port and can cause the link to become unstable. This instability decreases performance on the links, and communication between the switches in the stack is adversely affected.

If a Catalyst switch is connected through its GigaStack GBIC to another switch’s GigaStack GBIC that does not support loop detection, the GBIC LEDs turn these colors:

•The GigaStack GBIC LED on the switch without loop detection turns green almost immediately.

•The GigaStack GBIC LED on the switch with loop detection flashes green for 15 seconds and then turns green.

As a result, all GBIC links are enabled if no loop is created. If a loop is present, the software does not detect it, excessive collisions occur on these ports, no traffic passes through the stack, and the GigaStack GBIC LEDs remain green.

To avoid problems with loop configurations, make sure that all switches in your stack are running the appropriate IOS release as shown in Table 1-5 on page 1-8. For more information, see the “Minimum IOS Release for Redundant Loop Configurations” section on page 1-7. For switch software upgrade information, refer to the release notes for your switch.

Removing a GigaStack GBIC

Remove a GigaStack GBIC as follows:

Step 1 Release the GigaStack GBIC from the slot by simultaneously squeezing the two plastic tabs (one on each side of the GigaStack GBIC).

Step 2 To remove, slide the GigaStack GBIC out of the slot. A flap drops down to protect the internal connector.

 

 

Catalyst GigaStack Gigabit Interface Converter Hardware Installation Guide

 

 

 

 

 

 

78-6460-04

 

 

2-13

 

 

 

Page 44 Page 46
Page 45
Image 45
Cisco Systems WS-X3500-XL manual Removing a GigaStack Gbic
Page 44 Page 46

WS-X3500-XL specifications

Cisco Systems has long been a leader in networking technology, and one of its robust offerings is the WS-X3500-XL line card. This high-performance module is designed for the Catalyst 3500 series switches, providing enhanced functionality and flexibility for enterprise networking environments.

The WS-X3500-XL boasts several main features that make it a valuable addition to any network. Firstly, it supports a variety of Fast Ethernet options, which allows organizations to run 10/100 Mbps connections. Its versatility in port configurations ensures that businesses can tailor their networks according to specific requirements without needing to invest in multiple hardware components.

Another hallmark of the WS-X3500-XL is its support for Cisco's patented features, such as VLANs (Virtual Local Area Networks) and QoS (Quality of Service). VLANs enable the segmentation of a network into distinct broadcast domains, enhancing security and improving traffic management. This capability is particularly important in larger environments where different departments may require their own isolated network segments.

In terms of technology, the WS-X3500-XL is equipped with support for advanced routing protocols such as RIP, OSPF, and EIGRP, making it suitable for both Layer 2 and Layer 3 networking scenarios. This adaptability allows organizations to optimize their routing processes and make efficient use of bandwidth.

Performance-wise, the WS-X3500-XL includes features like fast switching and multicasting capabilities for improved network efficiency. With its built-in forwarding engine, this line card ensures rapid packet processing, which is crucial for maintaining high performance in busy network environments.

The WS-X3500-XL also emphasizes redundancy and failover capabilities, which are vital for maintaining network uptime. It supports features like Spanning Tree Protocol (STP) for loop prevention, ensuring that the network remains stable and functional even in the event of a device failure.

In conclusion, the Cisco WS-X3500-XL line card stands out in the realm of networking equipment thanks to its versatility, robust feature set, and advanced technologies. Whether used in small to medium-sized businesses or larger enterprise networks, it provides the flexibility and performance required to meet modern networking demands. Its compatibility with a range of Cisco's technologies ensures a future-proof solution for evolving networking needs.