Chapter 2 Installation
Attaching the GBIC Clip
Attaching the GBIC Clip
Each GigaStack GBIC ships with a removable clip that can be attached to provide extra security against accidental cable removal. If you use the clip, you must attach it before inserting the GBIC into the slot.
Attach the clip as follows:
Step 1 Attach the clip to the GBIC by carefully inserting the clip tabs into the slots on either side of the GBIC, in the orientation shown in Figure
Figure
| Tab |
1 | 2 |
GigaStack GBIC ports | Alignment bump |
Notches on clip | 32256 |
|
Step 2 Insert the cable connector into the GBIC port according to your configuration.
Step 3 Swing the GBIC clip up toward the GBIC so that the alignment bump in the clip seats in the indentation on the GBIC bottom.
| Catalyst GigaStack Gigabit Interface Converter Hardware Installation Guide |