1Setup

6

5

7

9

10

8

11

5 Media holder bar

The media is supported by the media holder bar when installed in the printer.

6Media holder guide

This guide is moved horizontally to match the media size. The guide can be sliding it from the holder bar.

7Motor cover

It discharges the heat of the media feed motor. Do not cover it with media etc.

8 Front cover

It is removed to install optional units such as the peeler or cutter.

9 Media width adjustment dial

It is adjusted to match the width of the media.

0 Media thickness adjustment dial

It is adjusted to match the thickness of the media.

-Large blue-head open lever

The head unit can be raised to install media by pushing this lever. It locks the head unit during printing.

12