Printer Adjustments

Media Width Adjustment

The head pressure varies according to the width of the media being printed. The head pressure balance must be adjusted according to media width so that constant head pressure is applied to the head. With this printer, it can be adjusted easily by turning the media width adjustment dial.

If the printing is blurred or lightly printed on one side or the media moves in a zigzag pattern adjust the head pressure balance.

After making an adjustment, confirm the output quality with a test print.

Caution

When using narrow media, be sure to MAKE this adjustment. (If you do not, the head may be damaged by jamming, etc.)

Media width adjustment dial

Dial position Media width mm (inches)

Head pressure

019.5 to 23.0mm (0.77 to 0.90)

1

23.0 to 30.0mm (0.90 to 1.18)

Low

 

 

 

2

30.0 to 39.0mm (1.18 to 1.53)

 

 

 

 

3

39.0 to 49.0mm (1.53 to 1.92)

 

 

 

 

4

49.0 to 62.0mm (1.92 to 2.44)

 

 

 

 

5

62.0 to 76.0mm (2.44 to 2.99)

 

 

 

 

6

76.0 to 88.0mm (2.99 to 3.46)

 

788.0 to 99.0mm (3.46 to 3.89)

8

99.0 to 108mm (3.89 to 4.25)

High

9108 to 118mm (4.25 to 4.65) (setting when shipped)

The following values are criteria.

43