2Printer Operation
Mode Settings
[Datamax® Emulation]
Menu Setting Table
Global Config menu - allows you to switch between 3 complete ‘config sets’ contained within the printer. Page Setup Menu - allows you to change settings related to the media or print quality.
System Setup Menu - allows you to change settings for the printer hardware and basic control systems. After Print Menu - changes how the printer reacts after the label has been printed.
Interfaces - changes interface parameters such as baud rate.
Menu Setting
7Datamax® Emulation
Top Menu | Sub Menu | Default | Menu | Remarks |
Global | – | Config Set 1 | Config Set 1 | Sets the Config Set. |
configuration |
|
| Config Set 2 |
|
|
|
| Config Set 3 |
|
|
|
|
|
|
Page Setup | Print Speed | 4 IPS | 2 to 6 IPS | Printing speed setting |
|
|
|
| (2 to 4 IPS with optional peeler.) |
|
|
|
|
|
| Print Darkness | 10 | 00 to 30 | Print darkness setting |
|
|
|
| (printhead temperature) |
|
|
|
|
|
| Darkness Adjust | 0 | Darkness command adjustment | |
|
|
|
|
|
| Continuous Media | 4.00 IN | 0.25 to 32.00 IN | Setting default length of continuous media, |
| Length | 101.6mm | 6.40 to 812.8mm | if selected. ; the lower line is in metric mode. |
|
|
|
|
|
| Vertical Position | 0.00 IN | Print start position adjustment | |
|
| 0.0mm |
| |
|
|
|
|
|
| Horizontal Shift | 0.00 IN | Horizontal printing location adjustment | |
|
| 0.0mm |
| |
|
|
|
|
|
| Vertical Image Shift | 0.00 IN | 0.00 to 32.00 IN | Adjust the off set value in vertical when |
|
| 0.0mm | 0.0 to 812.8mm | mapping data on a RAM. |
|
|
|
|
|
| Media Sensor | See Through | See Through | Label sensor selection |
|
|
| Reflect |
|
|
|
| None |
|
|
|
|
|
|
| Small Media | OFF | ON | Setting for small labels |
| Adjustment |
| OFF |
|
|
|
|
|
|
| Small Media | 1.00 IN | 0.25 to 1.00 IN | Setting length of small label media |
| Length | 25.4mm | 6.40 to 25.4mm |
|
|
|
|
|
|
System Setup | Sensor Level | 1.5V | 0.0V to 3.3V | Setting the threshold of the sensor |
|
|
|
|
|
| Paper End Level | 2.80V | 0.01V to 3.00V | Sets the paper end level. |
|
|
|
|
|
| Error Reporting | On Printing | On Printing | Setting for error report. |
|
|
| Immediate |
|
|
|
|
|
|
| Buzzer Select | ON | ON | Setting buzzer sounding conditions |
|
|
| OFF |
|
|
|
|
|
|
| Metric/Inch | Inch | Inch | Setting the units used |
|
|
| mm |
|
|
|
|
|
|
| Max Media Length | 10.00 IN | 1.00 to 50.00 IN | Setting the maximum label length |
|
| 254.0mm | 25.4 to 1270.0mm |
|
|
|
|
|
|
| Settings Lock | Off | On | When on, prevents software commands from |
|
|
| Off | changing the values set by the VuePrint menu |
|
|
|
|
|
| Keyboard Lock | Off | On | Prevents the control panel from affecting the |
|
|
| Off | printer's configuration. (User |
|
|
|
|
|
| Control Code | STD | STD | Selects between the Standard STX control |
|
|
| ALT | code or the "Alternative" code. Sometimes |
|
|
| called "AS400 mode". | |
|
|
|
|
|
32