1Setup
Confirmation of Carton Contents
Removing the Packing Material
The printer is shipped with adhesive tape in place to hold the top cover closed. Simply remove the two pieces of tape on either side of the top cover. Then simply open the cover by lifting up and tipping it backwards.
There is another strip of adhesive tape that must be removed which holds the mechanism closed for shipping. Remove the tape and attached paper by carefully peeling from the plastic case.
Retain the tape should you need to transport the printer again. A further piece of packing paper is inside the mechanism and you can remove this when the head is opened as explained below.
Check that the following accessories are included with the printer in the carton.
Media holder | Media holder Head cleaner | ||
guide | bar |
|
|
| Power cord | ||
Test label media |
|
| |
| G | QU |
|
| |||
| UIDE | RT | |
|
|
| TA |
Printer
Note: The empty carton and packing materials should be stored for future shipping of the printer.
10