3Printer Adjustments
Media Width Adjustment | |
| |
| The head pressure varies according to the width of the media being printed. |
| The head pressure balance must be adjusted according to media width so |
| that constant head pressure is applied to the head. With this printer, it can |
| be adjusted easily by turning the media width adjustment dial. |
| If the printing is blurred or lightly printed on one side or the media moves in |
| a zigzag pattern adjust the head pressure balance. |
| Caution |
|
|
| When using narrow media, be sure to do this adjustment. (If you do not, |
| the head may be damaged by jamming, etc.) |
Media width adjustment dial
Dial position Media width mm (inches) | Head pressure |
019.5 to 23.0mm (0.77 to 0.90)
1 | 23.0 to 30.0mm (0.90 to 1.18) | Low |
|
|
|
2 | 30.0 to 39.0mm (1.18 to 1.53) |
|
|
|
|
3 | 39.0 to 49.0mm (1.53 to 1.92) |
|
|
|
|
4 | 49.0 to 62.0mm (1.92 to 2.44) |
|
|
|
|
5 | 62.0 to 76.0mm (2.44 to 2.99) |
|
|
|
|
6 | 76.0 to 88.0mm (2.99 to 3.46) |
|
788.0 to 99.0mm (3.46 to 3.89)
8 | 99.0 to 108mm (3.89 to 4.25) | High |
9108 to 118mm (4.25 to 4.65) (setting when shipped)
The following values are criteria.
38